Engineering & preparation
- Customer requirements and stand layout
- Design for 160 chips and 12 magnetic blocks
- Plan flat-pack panels, fittings and installation

RETAIL COLOR DISPLAY CASE STUDY
PHOENiX Sample engineered a custom modular color display stand for SIPES, planned for a production run of several hundred units for installation across tinting centers in its home market and neighboring countries.
The objective was to make a large palette accessible while letting customers lift real-paint trend samples, feel the painted texture and compare appearance under white, warm-yellow or combined illumination.

Rotate the stand and compare White 6500K, Neutral 4000K and Warm 3000K illumination using the buttons below.
Rotate the 3D model to inspect the enclosed body, the 160 color chips and the removable magnetic trend blocks.
The 3D model and lighting changes are illustrative; they are not calibrated color measurements.
RETAIL COLOR DISPLAY CASE STUDY
RETAIL COLOR DISPLAY CASE STUDY
ENGINEERING CHALLENGE
The stand had to present 160 color references in a clear layout, hold 12 detachable magnetic blocks safely, and incorporate two independently selectable lighting options without making day-to-day use complicated.
For a rollout across many tinting locations, the complete structure also had to be packed as separate components, with clear instructions, appropriate tools and the accessories needed for straightforward on-site assembly.

RETAIL COLOR DISPLAY CASE STUDY
A broad reference range arranged for quick browsing and comparison at the tinting counter.
Lightweight engineered-wood blocks painted with actual SIPES coatings and held magnetically, so customers can remove, touch and replace them.
White light, warm-yellow light or both together help visitors compare the visual effect of changing illumination. This is an illustrative comparison, not a calibrated simulation of every room.
Separate carton-packed stand components, an assembly manual, installation tools and fittings support storage, transport and repeatable setup.

RETAIL COLOR DISPLAY CASE STUDY
Each stand incorporates the 160-color display and the 12 detachable painted trend blocks. A separate supply box contains multiple replacement or take-away cards for each of the 160 shades, organized for practical use in the color center.
The 12 lightweight real-paint blocks are supplied as a protected set for mounting on the magnetic section. Stands are supplied in flat-packed cartons together with assembly instructions, necessary accessories and suitable tools. The modular packaging supports efficient shipping, storage and phased installation at retail locations.
PROCESS FLOW DIAGRAM
A project-specific process connecting industrial design, real-paint samples, lighting integration and multi-location deployment.
RETAIL COLOR DISPLAY CASE STUDY
The system combines physical color selection, tactile sample evaluation, adjustable viewing light and practical installation logistics in one branded display concept. The planned production scope is several hundred stands.
PHOENiX Sample proposed the removable magnetic samples and concept for comparing three lighting modes to introduce a new way of presenting colors. The display was intended to support both sales staff and customers in paint mixing centers.
SIPES reviewed a complete physical prototype with magnetic samples and lighting before production.
Shipping and assembly were the main execution challenges. The stand was divided into clearly defined parts with an assembly guide. Assembly from the packaged components was tested inside the factory.
Checks covered the structure, finish, sample retention and handling, and all three lighting modes. The customer expressed satisfaction with the display concept and execution.
Posts from @sipes_egypt about Color Studio and choosing colors in store. Links open Instagram in a new tab.
RETAIL COLOR DISPLAY CASE STUDY
It combines 160 color chips and a separate section containing 12 removable magnetic trend-color blocks.
No. They are lightweight engineered-wood blocks coated with real SIPES paint so the surface and texture can be handled directly.
Users can select white light, warm-yellow light or both together. Appearance can change under different illumination; this is a visual comparison rather than a calibrated measurement.
The stands are designed for carton-packed delivery as separate parts, with assembly manuals, appropriate tools and fittings. The package also includes organized cards for the 160 shades.
Discuss modular stands, real-paint samples and retail color selection systems with PHOENiX Sample.
Discuss your next color sampling project with our team.